China Electrical Power Transformer manufacturer

Three Phase Oil Immersed Transformer , S11 Oil Filled Industrial Power Transformer

Product Details:
Place of Origin: China
Brand Name: HENGFENGYOU
Certification: ISO IEC CB COC KEMA SNI SABS CCC
Model Number: S-11
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: 200-200000/piece
Packaging Details: wooden case
Delivery Time: 15 DAYS
Payment Terms: LC T/T
Supply Ability: 5000 pieces/year
Contact Now

Detail Information

Rated Capacity: 6300-63000kVA Rated HV: 110kV
Rated LV: 6.3-11kv Frequency: 50Hz Or 60Hz
Tapping Range: ±8x1.25% Phase: Three Phases
Connection Symbol: Ynd11
High Light:

three phase oil immersed transformer

,

oil immersed distribution transformer

Product Description

S11 Three Phase Oil Immersed Oil-Immersed Type Transformer Oil-Filled Electric Transformer

 

Coil Structure:

 

The high and low voltage coil is packed according to the split phase. The design pressure is

evenly compressed to ensure the coil axial strength.

 

The inner coil is lined with high-strength phenolic paper tube. The internal and external struts

are used on the high and low voltage coil, technically making ensure enough tightening of the

coil radial.

 

The exposed wires inside the transformer are insulated. Add the leading wire support point,

reinforce the strength of leading wire support frame and shell. The leading wire connection

adopts cold crimping technology.

Three Phase Oil Immersed Transformer , S11 Oil Filled Industrial Power Transformer 0

 

Electrical equipment and supplies 1250kva transformer 11kv 33kv

1. The height of sea level is less than 1000m.
2. Highest temperature 40ºC
3. Lowest temperature: -20ºC
4. Maximum daily average temperature: 25ºC
5. Maximum annual mean temperature: 20ºC
6. The relative humidity is less than 95%(when the sir temperature is 25ºC)
7. Install at the site with dust methane, but no explosion water
8. Power supply voltage profile approximate to sine wave

 

Oil Tank Manufacturing:

Transformer tank adopts bucket type or bell-type. Model "F" is for the side blowing and

air-cooled type. The sealing rubber uses "0" type of the overall structure to ensure that

no leakage occurs.

All the gas collection pipelines on the top cover of the bell jar adopt the slope structure

leading to the gas relay.

The fuel tank takes shape by compression molding of reinforcing ribs. The cushion blocks

for the jack are 4 pieces and are marked with oil paint. The structure layout of transformer

is reasonable, beautiful. The inner wall of the fuel tank is coated with epoxy resin paint. and

the external wall of the tank paints the high-quality silver power coating.

The transformer explosion-proof device uses YSF8-type pressure relief valve.

 

Three Phase Oil Immersed Transformer , S11 Oil Filled Industrial Power Transformer 1

Three Phase Oil Immersed Transformer , S11 Oil Filled Industrial Power Transformer 2

Get in touch with us

Enter Your Message

You Might Be Into These