GCK Type Low Voltage Switchgear Withdrawable Strong Versatility High Performance

Product Description

GCK Type Low Voltage Switchgear

Description
GCK type low-voltage withdrawable switchgear (hereinafter referred to as switchgear) is applicable to the power distribution system with AC 50(60)HZ, rated operating voltage of 660V and below. It consists of two parts, the Power Distribution Center (PC) cabinet and the Motor Control Center (MCC). As a power distribution motor control and lighting distribution equipment. The switchgear complies with IEC60439-1 (low-voltage switchgear and control equipment), GB7251.1-2013 (low-voltage switchgear and control equipment), and GB/T14048.1-2006 (low-voltage switchgear and control equipment general rules). And it has high breaking capacity, good dynamic thermal stability, advanced and reasonable structure, flexible electrical scheme, series, strong versatility, arbitrary combination of various program units, and a large number of loops accommodated by a single cabinet, saving floor space ,high degree of protection, safety and reliability, easy maintenance and so on. This product is widely used in power plants, substations,metallurgy, textile, petrochemical, factories and mines, high-rise buildings and other occasions.

Standards

GB7251 Low-voltage switchgear and control equipment
JB/T9661 Low Voltage Withdrawable Switchgear
Gb14048 Low Voltage Switchgear Control Equipment
GB4942 low voltage electrical enclosure protection class
GB3047 Basic dimensions of panels, frames and cabinets
GB9466 Low voltage switchgear basic test method
GB2681 Wire color in electrical installations
IEC439 Low-voltage switchgear and control equipment

Conditions

1. The ambient air temperature must not exceed +40 °C, and the average temperature within 24 hours does not exceed +35 °C;
2. The lower limit of the ambient air temperature is a 5 °C;
3. Indoor installation and use, the altitude of the place of use shall not exceed 2000m;
4. Air cleaning, when the maximum temperature is +40°C, the relative humidity must not exceed 50%; at lower temperatures, greater relative
humidity is allowed; for example, the relative humidity at +20°C is 90%, but consider Due to changes in
temperature, moderate condensation may occasionally occur.
5. The inclination of the installation and the vertical surface does not exceed 5 °C;
6. The device is adapted to the transport and storage of the following temperatures: between -25°C and +55°C, within a short time (up to 24h)
up to 70°C, at which temperature the device should not be subjected to any incompatibility Recovered damage,and should work properly under normal conditions;
7. The device should be installed in a place where there is no violent vibration and impact, and where the electrical components are not corroded.
*Note:* According to the agreed conditions, to provide users with products under special conditions of use.

Features

This device is a bayonet type switch device. It adopts a modular structure design. All the structural parts of the cabinet frame are galvanized, spray treated, and connected to each other as a basic cabinet frame with screws. Doors, baffles, partitions,drawers are added as required. , mounting brackets, busbars and electrical components are assembled into a complete control center cabinet. From the structure, it can be divided
into three parts: cabinet, bus system and functional unit.

The device is designed for two types of three-phase four-wire and three-phase five-wire power distribution system, in which PE line of protection grounding bus is installed on the underside of the cabinet, and the outlet end is connected with bus bar,which makes it very convenient for users to connect cables; In order to ensure the reliable continuity of the grounding, all the guide rails and other general parts of the cabinet are galvanized; natural ventilation mesh covers are provided on the top of the switchgear without reducing the degree of protection of the enclosure. Compact structure, can accommodate more functional units in a smaller space, saving user investment.

1. Structural versatility. The cabinet body is assembled from modular structure of C section (E=25mm), and the assembly is flexible.

2. Various sizes of draw-out units can be combined in any combination to meet system design requirements.

3. vertical busbars and outlets have good insulation protection, thus ensuring safe and reliable after-cabinet maintenance.

4. The unique mechanical locking mechanism has obvious operation, test,and extraction position marks, and the operation is safe and reliable.

5. The drawer propulsion mechanism adopts bearing rolling, the drawer operation is flexible and convenient, and the same specification drawer
has strong interchangeability.