Detail Information
Rated Capacity:	30-3000kva	Type:	Dry Type Transformer,Cast Resin
Standard:	IEC60076,IEC,GB1094-1996; JB/T10088-2004; GB/T6451-2008; EQV,CNS,EC/ GB/T6451-2008	Product Name:	3 Phase Dry Type Electrical Transformer 300kva
Material:	Copper,amorphmos Alloy	Input Voltage:	11kv/10.5kv/10kv/6.3kv/6kv
Efficiency:	High Efficiency
High Light:	cast resin dry type transformer , power distribution transformer

Product Description

SCB-Series Dry Type Hipot Electrical Trans Power Distribution Transformer Amorphous Alloy

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

Products introduction

SCB10 epoxy resin cast dry-type transformer is an upgrade product of SCB9. SCB10 series products features significant high mechanical strength, high electrical strength, high heat resistance and low loss, low noise, low partial discharge. So SCB10 dry-type transformer is environmental protection products for new generation of urban power grid update, and is the mainstream product in the current transformer market. It is especially suitable for commercial center, airport, high building, chemical plant, nuclear power station, ship and other important places requiring fire prevention, explosion-proof and moisture-proof.

SCBH15 Series amorphous alloy dry-type transformer is a new type energy-saving transformers, which combines technology advantage with low-loss of amorphous alloy and good- insulation and strong mechanical strength of traditional epoxy resin pouring transformer.

By comparing with the traditional SCB10 series silicon steel dry-type transformers, it can approx. reduce no-load loss by 70%, no-load current by 80%, and operating temperature by 30-40℃; the service life extends appox.10 years. Moreover,SCBH15 Series transformer has the advantages of fire resistance, flame retardant, high reliability and maintenance free, which can be used in the power load center, suitable for places with higher demands in fire protection and higher safe demand environment.

SCB-Series Dry Type Transformer Amorphous Alloy With High Heat Resistance 0

Products details:

10/0.4kV Dry Type transformer Technical parameters(Second level of energy efficiency)

Rated capacity (kVA)	Voltage combination			Connected group label	No-load loss (W)	Load loss(W)			No-load current(%)	Impendace voltage (%)	sound power level (dB)	Exterior size (L x w x h)	Total weight (kg)
	High voltage(kV)	tap range	Low Voltage (kV)			Load loss(W)
						130°C(B)	155°C(F)	180°C(H)
						100°C	120°C	145°C
30	6 6.3 6.6 10 10.5 11	±2 x 2.5 ±5	0.4	Dyn11	150	670	710	760	0.6	4.0	57	900 x 900 x 800	300
50					215	940	1000	1070	0.6		57	955 x 900 x 900	350
80					295	1290	1380	1480	0.6		58	985 x 950 x 960	400
100					320	1480	1570	1690	0.6		58	1035x1250x980	450
125					375	1740	1850	1980	0.6		59	1060x1280x1000	500
160					430	2000	2130	2280	0.6		59	1120x1320x1050	680
200					495	2370	2530	2710	0.5		60	1135x1330x1105	770
250					575	2590	2760	2960	0.5		60	1170x1330x1165	900
315					705	3270	3470	3730	0.5		62	1185x1360x1225	1010
400					785	3750	3990	4280	0.4		62	1210x1380x1300	1205
500					930	4590	4880	5230	0.4		63	1245x1400x1380	1400
630					1070	5530	5880	6290	0.4		63	1295x1410x1355	1515
630					1040	5610	5960	6400	0.3	6.0	63	1295x1410x1355	1515
800					1210	6550	6960	7460	0.3		65	1375x1450x1480	1880
1000					1410	7650	8130	8760	0.3		65	1430x1480x1525	2170
1250					1670	9100	9690	10300	0.25		67	1480x1500x1570	2525
1600					1960	11000	11700	12500	0.25		67	1500x1520x1710	2980
2000					2440	13600	14400	15500	0.20		69	1570x1550x1735	3480
2500					2880	16100	17100	18400	0.20		69	1625x1600x1825	4080
1600					1960	12200	12900	13900	0.25	8.0	67	1500x1520x1710	2980
2000					2440	15000	15900	17100	0.20		69	1570x1550x1735	3480
2500					2880	17700	18800	20200	0.20		69	1625x1600x1825	4080

Note: due to the constantly updated products, shape size and product weight in the table will have some changes, please refer to provide the appearance size chart when ordering.

Use condition:

The height above the sea level is below 1000m;
Highest air temperature +40ºC;
Highest daily average air temperature+30ºC;
Highest annual average air temperature +20ºC;
Lowest outdoor air temperature -5ºC.

OUR SERVICE:

1. quick response in before sales period help you got order.
2. excellent service in production time let you know each step we made.
3. reliable quality solve you after sale headache.
4. long period quality warranty ensure you can buy without hesitate.

SCB-Series Dry Type Transformer Amorphous Alloy With High Heat Resistance 2

Tag:

Product Details:
Place of Origin:	China
Brand Name:	HENGFENGYOU
Certification:	ISO IEC CB COC KEMA SNI SABS CCC
Model Number:	SCB10,11,12,13,15
Payment & Shipping Terms:
Minimum Order Quantity:	1
Price:	200-200000/piece
Packaging Details:	wood pack
Delivery Time:	15 DAYS
Payment Terms:	LC T/T
Supply Ability:	5000 pieces/year

SCB-Series Dry Type Transformer Amorphous Alloy With High Heat Resistance

cast resin dry type transformer

power distribution transformer

cast resin dry type transformer

dry cast resin transformers

power distribution transformer

Copper winding dry type 225kva distribution transformer 6 /0.4kv

11kv 1000kVA Epoxy Resin Cast Dry-Type Transformer/Distribution Transformer

11KV 33 KV Electrical Power Distribution Dry Type Transformer energy saving

10/0.4kv Dry Type Transformer

11kv 1250kVA Epoxy Resin Cast Dry-Type Transforme

30kVA 50kVA Dry Type Cast Resin Transformer for Indoor Installation

1600kVA 11-0.4kv Cast Resin Dry Type Transformer

11KV 630KVA 800KVA 1000KVA Three Phase Toroidal Dry Type Power distribution Transformer

Smart electric global service provider, make life better!