HV XGN2 High Voltage Switchgear Box Type Fixed AC Metal Enclosed Switchgear

Product Description

HV XGN2 high voltage box type fixed AC Metal enclosed switchgear for power project

 
1. General
XGN2-12 Box Irremovable-type AC Metal-enclosed switchgeaer (switchgear for short) is

used in electric system rated voltage 3.6-12kv three-phase AC 50Hz and rated current

630-3150A to receive and distribute power, especially used in frequent operating conditions.

The busbar system is single busbar, but it can be derived into single busbar with bypass and

double busbar system.
The switchgear meets the national standard GB3906 "3-35 KV AC Metal-enclosed

Switchgear" and the requirement of international standard IEC298,and has perfect

function of error prevention. The switchgear mainly adopts ZN28A-12, ZN28-12 and so forth

vacuum circuit breakers. Isolation switch adopts GN30-12 rotary isolator, GN22-12 large

current isolation switch and GN30-12 rotary large current isolation switch.
2. Working Conditions
Ambient temperature: -10-+40ºC
Altitude:≤1000m (Altitude over 1000m can be negotiated with the company)
Humidity: daily average≤95%, monthly average≤90%
Earthquake intensity: ≤magnitude 8
it is applicable in the place without fire disaster, explosion hazard, serious pollution,

chemical corrosion and violent vibration.
3. Structure Features
XGN2-12 switchgear is metal-enclosed box-type structure. The framework of the

cabinet is welded by Angle steel. And the cabinet can be divided into circuit breaker

compartment, busbar compartment, cable compartment, relay instruments and so forth.

Each compartment is separated by steel plates.
 

 
 
_{1. Ambient temperature: not higher than + 40"C, not lower than- 15uit breaking, and}

_{within 24 hours its average.Temperature is not higher than +35 degree c, the equipment}

_{should be used to reduce capacitywhen exceeding the above ambient temperature.}

_{2. Relative humidity: the daily average is not more than 95%, andtic operation the monthly}

_{average is not more than 90%.Number 3. Altitude: Usually the installation site is not more}

_{than 1000m6, 7.2, 12KV) above sea level.The bureau should reduce its capacity in placeswith}

_{an elevation of 1000m.nber}

_{3. Earthquake Intensity: No more than 8 degrees.}

_{4. The equipment should be installed without fire, explosion and violentvibration.No chemical}

_{corrosion and  other serious dirty places.6. If the above conditions of use are not satisfied, they}

_{should besettled through negotiation between the user and the manufacturer.}

1. Your inquiry related to our product & price will be replied within 48 hours

2. Well-trained & experienced staff are to answer all your inquiries in English

3. Working time: 8:00am ~17:30pm, Monday to Saturday. (UTC+8)

4. Customized solution & perfect after-sale service

5. Payment: we can accept T/T, L/C, Western Union.

6. For large order, engineer can be sent to your country for on-site mainternace instructions.