|Place of Origin:||China|
|Certification:||ISO IEC CB COC KEMA SNI SABS CCC|
Payment & Shipping Terms:
|Minimum Order Quantity:||1|
|Packaging Details:||wooden case|
|Delivery Time:||15 DAYS|
|Payment Terms:||LC T/T|
|Supply Ability:||5000 pieces/year|
|Low Voltage:||0.22/0.38/0.4/0.69kV||Certification:||ISO9001 /CE|
three phase oil immersed transformer,
oil immersed distribution transformer
Power Distribution Transformers
Oil Tank Manufacturing:
Transformer tank adopts bucket type or bell-type. Model "F" is for the side blowing and air-cooled
type. The sealing rubber uses "0" type of the overall structure to ensure that no leakage occurs.
All the gas collection pipelines on the top cover of the bell jar adopt the slope structure leading to
the gas relay.
The fuel tank takes shape by compression molding of reinforcing ribs. The cushion blocks
for the jack are 4 pieces and are marked with oil paint. The structure layout of transformer
is reasonable, beautiful. The inner wall of the fuel tank is coated with epoxy resin paint. and the
external wall of the tank paints the high-quality silver power coating.
The transformer explosion-proof device uses YSF8-type pressure relief valve.
Electrical equipment and supplies 1250kva transformer 11kv 33kv
1. The height of sea level is less than 1000m.
2. Highest temperature 40ºC
3. Lowest temperature: -20ºC
4. Maximum daily average temperature: 25ºC
5. Maximum annual mean temperature: 20ºC
6. The relative humidity is less than 95%(when the sir temperature is 25ºC)
7. Install at the site with dust methane, but no explosion water
8. Power supply voltage profile approximate to sine wave