|Place of Origin:||China|
|Certification:||ISO IEC CB COC KEMA SNI SABS CCC|
Payment & Shipping Terms:
|Minimum Order Quantity:||1|
|Packaging Details:||wooden case|
|Delivery Time:||15 DAYS|
|Payment Terms:||LC T/T|
|Supply Ability:||5000 pieces/year|
|Coil Number:||2 Windings||Input Voltage::||110v/200v/220v/240v/360v/480v|
three phase oil immersed transformer,
oil immersed distribution transformer
The oil immersed power transformer is used for regulating voltage and AC power transmission. The advantages include small dimension, reasonable price, strong weather resistance and so on. It is applicable to power systems, industrial and mining enterprises, transportation, post and telecommunications sector, research institutes, etc.Smart and diverse structures and nice appearance make this product to meet the needs of different users.
High-quality grain-oriented cold-rolled silicon steel sheet are employed, and the whole oblique non-porous
banding structure are used here. The core has a multi-level ladder shape, with three joints or five joints, which
is of low no-load loss and low noise. Rolled cores are direct rolled by certain special equipment, which gives the
advantages including no seam, no corner weight, reluctance reduction, low no-load loss. Amorphous alloy is an
advanced core material, which leads to an average reduction of 72% no-load loss and a reduction of 50% no-load
The high-quality QQ acetal enameled round copper wire and oxygen-free copper rod are used to form the coil.
The coil type includes cylinder type, continuous type, new type spiral type, split type, etc. It has sufficient electrical
strength, mechanical strength and cooling capacity.
In order to increase the capacity of anti-short-circuit of the transformer, self-adhesive transposition wire is used in the
35kV and above windings. The wire is made of self-adhesive acetal enameled flat wire, and after winding into a coil,
it is heated so that the flat wire could be bonded between each other to form a rigid coil, which can withstand greater
bending stress, thereby enhancing the capacity of anti-short-circuit of the transformer. The most important feature of
the self-adhesive transposition wire is that it can reduce the loss of the transformer, and as a result of multi-stranded
conductor with transposition, the eddy current loss and circulation loss are greatly reduced, it can also reduce the
temperature rise of the partial hot spots of winding, thus the winding temperature distribution is more uniform.
The oil tank is made of high quality steel plate, and the shape includes elliptical shape, rectangular shape, etc.
The type of the radiator includes: corrugated sheet type radiator, expansion type radiator and corrugated type tank.
The sealing performance test is conducted on oil tanks. The inside and outside surfaces are pickling and phosphate
treated, and then spray priming paint for three times and surface paint for one time, which give its corrosion resistance.
1.OEM is available.
2.Your inquiry related to our product & price will be replied within 24 hours
3.Well-trained & experienced staff are to answer all your inquiries in English
4.Working time: 8:00am ~17:45pm, Monday to Saturday. (UTC+8)
5.Customized solution & perfect after-sale service
6. Payment: we can accept T/T, L/C, Western Union.
7. For large order, engineer can be sent to your country for on-site mainternace instructions.
Distribution transformer is one of the important equipments in power supply and distribution system of industrial and mining enterprises and civil buildings. It reduces the network voltage of 106 kV or 35 kV to the bus voltage of 230 / 400V.
1 This product is suitable for AC 5060 HZ, three-phase maximum rated capacity of 2500 KVA
2 single-phase maximum rated capacity of 833 KVA, generally do not recommend use of single-phase transformer,
3 can be used in indoor and outdoor, capacity of 315 KVA and below
4 can be installed on the Rod
5 The ambient temperature shall not be higher than 40 °C, not lower than-25 °c,
6 the maximum daily average temperature shall be 30 °c, the maximum annual average temperature shall be 20 °c,
7 the relative humidity shall not exceed 90%
8 the ambient temperature shall be 25 °C, and the altitude shall not exceed 1000m.
9 If it does not conform to the above-mentioned conditions, it shall be adjusted according to the relevant provisions of GB6450-86.
Enter Your Message