Detail Information
Type:	Dry Type Distribution Transformer,Cast Resin	Material:	Copper,amorphmos Alloy
Usage:	Power,Distribution Transformer	Phase:	Three,Single
Frequency:	50/60Hz	Rated Capacity:	30-3000kva
Input Voltage:	11kv/10.5kv/10kv/6.3kv/6kv	Efficiency:	High Efficient
High Light:	cast resin dry type transformer , power distribution transformer

Product Description

Note: Due to continuous product improvement, the dimensions provided in this sample are for reference only. If necessary, our company can design and produce according to user requirements. Please contact the company in time.

SCB10 Three Phase Dry Type Power Transformer

The height above the sea level is below 1000m;
Highest air temperature +40ºC;
Highest daily average air temperature+30ºC;
Highest annual average air temperature +20ºC;
Lowest outdoor air temperature -5ºC.

(defines in detail when transformer in special service conditions )

· Product introduction

SCB10 is three phase power transformer, dry-type, encapsulating high quality iron core and solid cast resin coils.

It is an upgrade from the previous SCB9. It has higher mechanical and electrical strength, better heat resistance rate and lower power loss.

SCB10 dry-type transformer is environment-friendly and most popular in global market, widely used in super mall, airport, office building, chemical plant and other places of strict requirement of fire-proof, explosion-proof and moistureproof.

10kv 30 - 2500kVA 3 Phase Industrial Electrical Transformer High Mechanical Strength 0

Specifications and Dimensions

Rated high voltage	10(10.5,11,6,6.3,6.6)kV	Connection symbol	Yyn0 Dyn11
Rated low voltage	0.4kV	Insulation level	LI75AC35/AC3

Type	P0	Pk	Uk	I0	LP	GT	boundary dimension(mm)				Shell size(mm)
Type	(W)	(W)	(%)	(%)	dB(A)	kg	long	wide	high	gauge	long	wide	high
SC10-30/10	190	705	4	2.0	46	380	890	560	750	550	1200	1100	1100
SC10-50/10	270	995		2.0	46	450	890	650	820	550	1200	1100	1100
SC10-80/10	365	1380		1.2	46	660	1000	720	870	550	1300	1150	1150
SC10-100/10	400	1575		1.2	46	750	1000	720	935	550	1300	1150	1200
SC10-125/10	470	1845		1.0	47	960	1140	720	1065	550	1450	1150	1400
SC10-160/10	540	2125		1.0	47	1080	1140	720	1180	550	1450	1150	1500
SC10-200/10	620	2525		1.0	47	1230	1210	870	1165	660	1550	1300	1500
SC10-250/10	720	2755		1.0	49	1360	1210	870	1245	660	1550	1300	1600
SCB10-315/10	880	3470	4	0.8	49	1680	1300	870	1170	660	1650	1300	1600
SCB10-400/10	970	3990		0.8	50	1780	1340	870	1255	660	1700	1350	1650
SCB10-500/10	1160	4880		0.8	50	1830	1360	1020	1415	820	1700	1400	1700
SCB10-630/10	1340	5875		0.8	50	2130	1420	1020	1430	820	1750	1400	1700
SCB10-630/10	1295	5960	6	0.6	50	2100	1440	1020	1390	820	1750	1400	1700
SCB10-800/10	1520	6955		0.6	50	2450	1500	1020	1430	820	1800	1400	1800
SCB10-1000/10	1765	8130		0.6	51	2950	1640	1020	1465	820	1950	1400	1800
SCB10-1250/10	2085	9690		0.4	51	3420	1700	1020	1585	820	2000	1450	1850
SCB10-1600/10	2440	11730		0.4	52	4170	1820	1070	1655	820	2150	1450	2000
SCB10-2000/10	3320	14450		0.4	52	4950	1910	1070	1785	820	2300	1450	2200
SCB10-2500/10	4000	17170		0.4	52	6750	2140	1070	1990	820	2550	1500	2250

Note: due to the constantly updated products, shape size and product weight in the table will have some changes, please refer to provide the appearance size chart when ordering.

Conditions of Use

The maximum ambient air temperature shall not exceed 40°C, and the minimum shall be not below -15°C;
The altitude shall not exceed 1,000m. If special customized transformers and low-voltage components are used, the altitude can reach 4,000m;
The vertical inclination is no more than 5°, and no violent vibration and impact;
The air humidity is not more than 90% (+25°C);
No gas and conductive dust that will seriously affect the insulation of transformer,no explosion hazard and corrosion of electrical components;
Outdoor wind speed shall not exceed 35m/s.
If service conditions exceed the above, our company is able to specially produce according to the customer requirement.

10kv 30 - 2500kVA 3 Phase Industrial Electrical Transformer High Mechanical Strength 1

10kv 30 - 2500kVA 3 Phase Industrial Electrical Transformer High Mechanical Strength 2

Tag:

Product Details:
Place of Origin:	China
Brand Name:	HENGFENGYOU
Certification:	ISO IEC CB COC KEMA SNI SABS CCC
Model Number:	SCB9,10,11
Payment & Shipping Terms:
Minimum Order Quantity:	1
Price:	200-200000/piece
Packaging Details:	wood pack
Delivery Time:	15 DAYS
Payment Terms:	LC T/T
Supply Ability:	5000 pieces/year

10kv 30 - 2500kVA 3 Phase Industrial Electrical Transformer High Mechanical Strength

cast resin dry type transformer

power distribution transformer

cast resin dry type transformer

dry cast resin transformers

power distribution transformer

Copper winding dry type 225kva distribution transformer 6 /0.4kv

11kv 1000kVA Epoxy Resin Cast Dry-Type Transformer/Distribution Transformer

11KV 33 KV Electrical Power Distribution Dry Type Transformer energy saving

10/0.4kv Dry Type Transformer

11kv 1250kVA Epoxy Resin Cast Dry-Type Transforme

30kVA 50kVA Dry Type Cast Resin Transformer for Indoor Installation

1600kVA 11-0.4kv Cast Resin Dry Type Transformer

11KV 630KVA 800KVA 1000KVA Three Phase Toroidal Dry Type Power distribution Transformer

Smart electric global service provider, make life better!