|Place of Origin:||China|
|Certification:||ISO IEC CB COC KEMA SNI SABS CCC|
Payment & Shipping Terms:
|Minimum Order Quantity:||1|
|Packaging Details:||wood pack|
|Delivery Time:||15 DAYS|
|Supply Ability:||5000 pieces/year|
|Type:||Dry Type,transformer,Cast Resin||Material:||Copper, Aluminum|
|Usage:||Power Distribution Transformer||Phase:||Three,Single|
Dry type SC(B)11, SC(B)10, SC(B)9 distribution transformer is widely used for power supply & distribution in industrial and civil occasions, to step down grid voltage (6-35KV) to line voltage 400V. The transformers are resin insulated, which is safe, non-pollute, flame proof and can be installed directly on the load centre, with the merits of free maintenance, easy installation, low operation cost, low loss and excellent humidity resistance.
Main application in: High-rise buildings, airports, terminals, power plants, transformer stations, residential areas or packages of various sites.
Product standard: IEC60076 & GB/T10228, GB109411, GB4208, GB6450
1. Voltage class: 6-35KV
2. Model of voltage regulation: Off-excitation or on-load tap changer
3. Tapping range: 5%, 2x2.5%,
4. Power Capacity: 10-4000kVA
5. Frequency: 50Hz or 60HZ
6. Phase No.: Single phase or three phase
7. Vector Group: Yyn0 or Dyn11
8. Impedance voltage: 4~8%
9. Service condition: 100% relative humidity, ambient temperature not more than 40ºC or according to customers' requirements
10. Type of cooling: AN or AF
11. Protection class: IP00, IP20, IP23
12. Insulation level: F/F
Altitude: ≤1, 000m
Highest ambient temperature: +40℃
Highest annual average temperature: +20℃
Highest monthly average temperature: +30℃
Lowest temperature: -25℃
Conditions of Use:
1. Meet the following requirements for the normal conditions of use conditions:
Altitude less than 1000m.
The maximum daily average temperature +40 °C
The highest annual average temperature +20 °C
Minimum temperature of -25 °C (for outdoor type transformers)
Minimum temperature of -5 °C (for indoor type transformer)
2. Special conditions of use conditions
Altitude more than 1000m.
The maximum temperature +45 °C
Minimum temperature of -25 °C
3. Power supply voltage waveform Supply voltage sine wave shape.
4. Symmetry of multi-phase power supply Multi-phase transformer is connected to the supply voltage should be approximately symmetrical.
1. Ultra low loss , energy and high electricity efficiency --- loss saving 70% compared with the traditional transformer no-Load electricity consumption;
2. Three column amorphous core,adopting the invention patenttechnology which has Ultra low working noise and solve thoroughly high working noise;
3. Low energy consumption and low loss characteristics of amorphous materials can save power consumption .reduce thepower generation, decrease relative S02 and C02 exhaustemission, reduce environmental pollution and greenhouse effect, it is maintenance free and zero pollution;
4. Low working temperature,the full load operating temperature less than 70℃,the insulation degradation slow so that the service life is long very much;
5. High overload capacity,high mechanical strength;
6. The amorphous core retain has the characteristics of low ironloss and low magnetizing current when passing high frequencyflux, so it will not cause core saturation and posses good harmonic resistance;
7. Fast capital recovery.
Note: due to the constantly updated products, shape size and product weight in the table will have some changes, please refer to provide the appearance size chart when ordering.