Low loss:the product no-load loss is 20% lower than the Sc (B) 11 type product with an

excellent energysaving effect, economic efficient operation and without maintenance.

Low noise:the product noise level is 10-15 db lower than the existing professional standard

JB/T10088- 2004Sound Level of 6- -220KV Transformer

Low partial discharge:resin mixture adopts foreign leading-edge mixing method and film type

vacuumdeaerator to evenly mix the mixture and remove the bubble in the bottom part of mixture.

The product hasa low partial discharge which can be controlled at 5PC. Both high voltage and low

voltage coils can bepoured in vacuum pressure so as to enable a encapsulating of resin insulation

and immersion amonglayers and inter-tums. The poured part has a compact solidity staicture with

anti-flaming, anti explosionand environmental protection features.
Glass fiber and other raw materials of winding coil have self- extinguishing property and will not

producearc due to short circuit. Resin will not produce harmful gas under high temperature.

1.The working condition

* Device types: indoor type

* Normal environment conditions of use: the elevation not more than 1000 m

* Environmental highest temperature + 40℃, minimum-25 ℃

* The special environment conditions of use: elevation of more than 1000 m

* Environmental highest temperature + 40 ℃, minimum-45 ℃. (when you order details)

* Mounting ambicnt: no corrosive gas, no obvious dirt environment

2.applicable  standard

* IEC60076 power transformer

* IEC723 dry power transformer

* GB6450-1986 dry power transformer

* GB/R1094-1996 power transformer

* GB4208-1993 outer shell protect grade(IP code)

All products of the company have passed the national type test like CCC, CQC , CTQC and other

national mandatory product certification, and has a perfect quality, occupational health and

environmental management system certification system. Our products have passed ISO9001, 2000

and other international quality system certification.

_{None of the dry-type transformers we see today are installed in a separate, tightly enclosed room, as in}

_{the oil-immersed type, but only in a relatively dry and clean room. In addition to this, it is also very convenient}

_{to transport or carry, no matter what kind of transport vehicles, trains, cars or other non-motor vehicles can be,}

_{but it is best to keep the car dry, clean and the product itself in good packaging. Practice has proved that really}

_{good products will always be more and more marketable. As dry-type transformers have very good fire-proof}

_{performance and are easy to install and maintain, they are also used more and more widely Especially in the}

_{modern commercial downtown, residential areas, hospitals, airports, stations, subways, theaters, schools,}

_{public places and other places with high requirements on fire protection.}